Head to head
Powertec Levergym WB-LS vs Multi System WB-MS (2027): One Frame or Three Stations?
WB-LS and WB-MS compared on footprint, station independence, partner training, plate demand, and total system cost.
Powertec Workbench Levergym WB-LS vs Powertec Workbench Multi System WB-MS: the specs, side by side
| Spec | Powertec Workbench Levergym WB-LS | Powertec Workbench Multi System WB-MS |
|---|---|---|
| Load capacity | Lever arm rated to 500 lb, other stations per manufacturer ratings | Station ratings up to 500 lb on main lever stations (manufacturer) |
| Footprint | About 81 x 58 in including bench position | About 120 x 73 in full configuration |
| Stations | Lever press and squat, lat pulldown, low row, arm curl, leg lift with attachments | Levergym station, squat station, bench press station, lat and row functions |
| Bench | Workbench utility bench, flat and incline positions | Multiple benches and stations included by configuration |
| Weight posts | Olympic plate posts | Olympic plate posts across stations |
Powertec Workbench Levergym WB-LS
The single frame levergym standard: press, squat, lat, row, and curl around one bench and one lever arm.
- Load capacity: Lever arm rated to 500 lb, other stations per manufacturer ratings
- Footprint: About 81 x 58 in including bench position
Sources: Powertec Workbench Levergym WB-LS documentation, Amazon listing specifications
Check price on Amazonor add to your Amazon cartPowertec Workbench Multi System WB-MS
Three stations in one frame: levergym, squat station, and a dedicated bench press station sharing plates.
- Load capacity: Station ratings up to 500 lb on main lever stations (manufacturer)
- Footprint: About 120 x 73 in full configuration
Sources: Powertec Workbench Multi System documentation, Amazon listing specifications
Check price on Amazonor add to your Amazon cartOur recommendation
Buy the WB-LS if you train alone or in turns; it trains every movement the Multi System does, in sequence. Buy the WB-MS if two people train at the same time or your program is built on supersets. Same maker, same language, completely different room and budget.
Changeovers versus independence
The WB-LS reconfigures one frame quickly between stations, which solo lifters stop noticing within weeks. The WB-MS keeps stations standing, so a press and a squat can be loaded at once. That independence is the entire price and size difference, distilled.
Footprint and room
Roughly eighty by sixty inches against roughly one hundred twenty by seventy three, before plate clearance. In practical terms: a large corner against a dedicated room. Measure with plates in hand, not from the brochure.
Plate appetite
One frame eats plates one station at a time. Three stations hold three loads at once, and partner training doubles the draw again. Multi System buyers should budget plates as a second, silent system cost.
Choose Powertec Workbench Levergym WB-LS if…
- You train solo or take turns with a partner
- Space must be shared with the rest of life
- You prefer one refined system over three standing stations
Choose Powertec Workbench Multi System WB-MS if…
- Two lifters train simultaneously most days
- Supersets and circuits structure your program
- A dedicated room is available and permanent
FAQ
Questions, answered straight
Is the training quality different between them?
Station by station, they are close cousins and both feel premium. The Multi System wins on flow and simultaneity, not on the feel of any single rep.
Which holds value better used?
The WB-LS, because far more rooms can fit it. Multi Systems sell to a smaller pool of buyers with the space, and price reflects that patience.
Can I upgrade from the LS to the MS later?
They are separate frames, not stages of one system. Some benches and attachments cross over, but plan on a replacement, not an expansion, if you change your mind.