In-depth review
Body-Solid GLGS100P4 Corner Leverage Gym Review (2027): The Corner Was the Point
Research review of the Body-Solid GLGS100P4 corner leverage gym package: swing arm geometry, lat and low pulley stations, the included GFID100 bench, and the 600 lb ceiling.
Body-Solid GLGS100P4 Corner Leverage Gym Package
Body-Solid leverage training folded into a corner: swing press arm, lat station, and low pulley wrapped around an included FID bench.
- 600 lb press arm and carriage rating (manufacturer)
- Load capacity
- 69 x 67 x 82 in gym frame; about 95 in deep with the bench in its working position
- Footprint
- Swing press arm, lat pulldown, low pulley, pull up conversion, squat and deadlift patterns
- Stations
Our verdict
Most compact leverage gyms are full frames with stations amputated. The GLGS100P4 is designed the other way, around a corner: a swing press arm with an unusually large radius, a lat station with a proper knee lock down, and a low pulley, wrapped into 69 by 67 inches and sold with a real bench. Its honest ceilings are a 600 lb system rating and a press carriage that starts near 30 lb before plates. Inside those lines, it is the most room literate leverage gym in this guide.
What we like
- Corner geometry uses floor space square rooms waste, 69 x 67 in before the bench slides out
- The included GFID100 is a genuine flat incline decline bench, usable on its own away from the frame
- Press arm raises to its top position and doubles as a pull up and chin up station
- Body-Solid lifetime in home warranty behind the whole package
What to watch out for
- 600 lb ceiling sits below the flagship levergyms in this guide
- The press carriage starts at about 30 lb before any plates are loaded
- Assembly is a multi box freight build that takes most of a day
Who it is for
Solo lifters and pairs in spare rooms and garage corners who want lever pressing, pulling, and squat patterns without surrendering the whole floor.
Corner geometry, measured honestly
The frame itself is 69 by 67 inches, and the bench slides in and out rather than living at full length, so the working depth of about 95 inches is a session measurement, not a storage one. That distinction is why owners in square rooms keep it: the corner it occupies was storing boxes, not training. Ceiling clearance for the pull up position is the one measurement to tape before ordering.
The swing arm and its large radius
The press arm swings on a larger radius than most lever arms, which Body-Solid intends to feel closer to a straight up and down bar path. In owner reports the practical effect shows up on presses and squats alike: less of the forward push sensation small radius arms produce at the bottom. Raised fully, the same arm becomes the pull up station, a conversion that takes seconds and gets used more than owners expected.
Lat and low pulley audit
The lat station's adjustable knee lock down is the detail that separates this package from corner gyms that treat pulldowns as an afterthought: heavy sets stay anchored instead of lifting the lifter. The low pulley covers curls and rows competently. Neither station is a cable crossover, and the single stack free, plate loaded carriage means load changes are plate changes, with the pauses that implies.
The bench is not a throw in
The GFID100 included in the P4 package is a heavy duty flat incline decline bench with transport wheels that also works completely independently of the gym. Owners consistently rate it above the benches bundled with rival systems, and for small gyms it quietly deletes a separate bench purchase from the budget. That, more than the corner shape, is the package's value argument.
Key specifications
- Load capacity
- 600 lb press arm and carriage rating (manufacturer)
- Footprint
- 69 x 67 x 82 in gym frame; about 95 in deep with the bench in its working position
- Stations
- Swing press arm, lat pulldown, low pulley, pull up conversion, squat and deadlift patterns
- Bench
- GFID100 flat incline decline bench included; slides in and out, works standalone
- Weight posts
- 9.75 in Olympic posts on the press arm and carriage, plus attached storage horns
What owners report
Commonly praised
- Genuinely fits a corner instead of just claiming to
- Bench quality surprises owners who expected a throw in
- The knee lock down makes lat pulldowns feel properly anchored
Common complaints
- Assembly time is the recurring first week complaint
- Starting carriage weight is heavy for smaller beginners pressing
- The red anodised finish divides opinion
Recurring themes from owner reviews on retailers and forums, summarised by our editors. Updated October 2026.
Sources: Body-Solid GLGS100P4 documentation, Amazon listing specifications
Also consider
Body-SolidBody-Solid SBL460P4 Freeweight Leverage Gym Package
Body-Solid's flagship leverage package: press and lat stations, a squat attachment, and an FID bench with leg developer on one heavy frame.
- Load capacity: Press and squat stations 600 lb, lat station 800 lb, leg developer and curl 400 lb (manufacturer)
- Footprint: 107 x 104 x 83 in assembled per the listing detail block; about 149 in long fully rigged with bench and squat attachment extended
Sources: Body-Solid SBL460P4 documentation, Amazon listing specifications
Check price on Amazonor add to your Amazon cartChoose the SBL460P4 if the room fits a full flagship package and higher station ceilings matter more than corner fit. Read our Body-Solid SBL460P4 Freeweight Leverage Gym Package review
GMWDGMWD Leverage Gym System
A value leverage system bundling press, squat, and cable style stations for home gyms on a budget.
- Load capacity: Station ratings per manufacturer listing
- Footprint: About 74 x 52 in floor footprint
Sources: GMWD leverage gym documentation, Amazon listing specifications
Check price on Amazonor add to your Amazon cartChoose the GMWD if the budget is the binding constraint and its longer station list matters more than finish and warranty depth.
Research-based assessment: manufacturer specifications and documentation, cross-checked against retailer listings and recurring themes in published owner feedback. We do not claim hands-on testing we have not performed.
FAQ
Questions, answered straight
Does the GLGS100P4 really fit in a corner?
Yes, that is its design premise: a 69 by 67 inch frame meant to sit into a corner, with the bench sliding out to about 95 inches of working depth during sessions and back in afterwards.
Can the included bench be used away from the gym?
Yes. The GFID100 is a standalone flat incline decline bench with transport wheels; the package design explicitly allows independent use, which suits dumbbell work in another part of the room.
What plates does it take?
Olympic plates on 9.75 inch posts, on both the press arm and the weight carriage, with attached horns for storage. Standard 1 inch plates do not fit the posts.